What are the requirements for storage environment of fine mist sprayer

Fine mist sprayer has become an indispensable tool in modern life due to its excellent spraying effect and wide application fields. However, in order to ensure its long-term stable performance and extend its service life, the requirements of the storage environment are particularly important.

Temperature and humidity control
The storage environment of the fine mist sprayer should be kept within a suitable temperature and humidity range. The ideal storage temperature should be controlled between 18℃ and 30℃, and the humidity should be maintained between 50% and 70% relative humidity (RH). Too high or too low temperature and humidity may have a significant impact on the performance of the sprayer. High temperature environment will cause the evaporation of the liquid inside the sprayer, which may cause nozzle clogging or corrosion of internal components. In addition, high temperature will accelerate the aging of materials and significantly shorten the service life of the sprayer. Relatively speaking, low temperature environment may cause the internal liquid to solidify, thereby affecting the spraying effect. At the same time, high humidity can cause internal parts to rust or corrode, while low humidity may dry the nozzle and increase the risk of clogging.

Avoid direct sunlight and high temperature heat source
The fine mist sprayer should avoid long-term exposure to direct sunlight or near high temperature heat source. Ultraviolet rays will accelerate the aging of materials and reduce the durability of the sprayer. High-temperature heat sources may increase the temperature of the liquid inside the sprayer, affecting its stability and spray effect, so the sprayer should be kept away from these environments.

Keep the environment clean
The cleanliness of the storage environment is critical to the performance of the sprayer. The environment should prevent dust, dirt and other impurities from entering the sprayer. Dust and dirt may cause the nozzle to clog, thus affecting the spray effect. In addition, impurities may also cause wear or corrosion to the internal parts of the sprayer, further reducing its service life.

Avoid vibration and shock
During storage, the fine mist sprayer should be protected from vibration and shock. Vibration and shock may cause the internal parts to loosen or be damaged, thus affecting its performance and stability. Therefore, when storing the sprayer, ensure that it is placed in a stable and fixed position to avoid interference from external forces.

Pay attention to ventilation and moisture-proofing
Although humidity control is an important requirement for the storage environment, an overly humid environment also poses potential damage to the sprayer. The storage environment should maintain proper ventilation to reduce humidity, and avoid placing the sprayer in a humid environment, such as a bathroom or basement. These environments may cause rust or corrosion to the internal parts of the sprayer, significantly reducing its service life.

Avoid chemical corrosion Fine mist sprayers should avoid contact with corrosive chemicals. These chemicals may corrode the surface coating or internal parts of the sprayer, resulting in performance degradation or damage. Therefore, when storing the sprayer, make sure it is away from any area where corrosive chemicals may be generated to maintain its performance and extend its service life.